| Table of Contents |
|---|
| Info |
|---|
NOTE - As of 2024, RapidSense Monitor is a legacy feature that will be deprecated later in the year. The functionality is still available to users. |
RapidSense Monitor
To access RapidSense Monitor, navigate to “insert RTR controller IP address here”/rsm in the web browser of a device on the same network as the RTR controller, or go to localhost:9000/rsm in the web browser of the controller itself.
...
Settings - Sensor Status
A “Settings” page is available within the RapidSense Monitor page in the bottom left. When it is clicked, it will bring up a hardware status screen for the sensors like below. This will display the sensors in the system and will indicate if the sensors have been successfully calibrated or not. If RapidSense detects that the camera has shifted by checking to the static Aruco calibration tag in the scene, the sensor will show as not calibrated in this screen.
...