Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Currently, RapidSense supports Aruco tags that are mounted off of the robot faceplate for camera calibration and tags mounted static in the scene to check calibration status against. If the tag cannot be permanently mounted off of the robot faceplate (such as being fixed on the end of arm tooling) and it must be removable, then it should be designed such that re-mounting the tag is accurate and repeatable. A Tool Center Point (TCP) location will need to be provided to the system for providing where the center of the tag is located relative to the robot faceplate origin.

...

image (1).pngImage Added

If more than one calibration tag is required for a system, each tag must have a unique pattern. It may be required to utilize more than one calibration tag pattern per system such as if:

...

View file
namearuco_tags.pdf

Excerpt
hiddentrue

Sample Aruco Tag Plate and Mounting Adapter Design

The below contains details of a sample fabricated Aruco tag for a system and a sample design for a mount to use to attach the tag to the robot. In this case, the tag is mounted to a plate that is mounted between the robot faceplate and the robot tooling. This mount works for the following robot models:

  • Mitsubishi RV7FR

  • FANUC LR Mate-200iD/7L

  • Kawasaki RS007N

  • Yaskawa GP8

...

Image AddedImage Added

View file
namearuco_adapter.step
View file
namearuco_plate.step
View file
nameInvalid file id - bc232038-8218-4c55-8744-bb705d29b0c1

View file
namearuco_plate_DWG.pdf
View file
namearuco_adapter_DWG.pdf