...

...

Menu Bar

...

The menu bar contains the File, Edit, Camera and About menus, whose options are described below.

File Menu

New Project

New Project (Ctrl+N) – Create a new project. When RapidPlan Create opens up the first time, the application will open in Model Mode in a new project.

Save Project

Save Project (Ctrl+S) - Saves the current project. The first time you save a project, you will need to create and name new folder in which to save the project. After that, the save command will save the project to that folder.

Save Project As…

Save Project As… (Ctrl+Shift+S) - Copies the current project to a new location and a new name you choose.

Open Project

Open Project - Displays the project directory, from which you choose an existing project. The current project will be closed and the chosen project loaded into RapidPlan Create. You can open projects created in RapidPlan Create 2.0 and 2.1 in RapidPlan Create 2.2.

When opening a project, you may see the “auto save found” dialog if the application was terminated without manual saving of the latest file. If you want to recover the latest unsaved file, press yes.

...

Open Recent Project

Open Recent Project - Displays a submenu of recent projects from which to choose.

Import Frames

Import frame data from another project or from a spreadsheet, which has been saved as a .txt or .csv file using either comma or space delimiters. The selection is available in Model Mode only and is disabled in Roadmap Mode. If the imported frames' names already exist in the project, a pop up dialog is enabled to allow users to replace or skip the frame(s) with duplicate names.

Import Frames Dialog and duplicate names popup dialog

...

File - The name of a .txt or .csv file.

...

Each line of the file must contain only the information of one frame. The file cannot have empty lines. The names of the frames must follow RapidPlan Create naming conventions. The engineering units of the frames are based on current project settings. The example above uses engineering units next to the numbers. There is no obligation of having these units to be the same as project-set engineering units. However, the units used in this example(next to the numbers) are optional and if they’re omitted only then project-set units will be used.

...

Name prefix - If the imported file does not include frame names on each line, you can add a name prefix to each frame. The imported frame names will start with the prefix, followed by the 0-based line number of each imported frame. For example, if Name Prefix = “newframe”, then imported frames will be newframe0, newframe1, newframe2, etc.

Import Targets

Import targets from a file of .txt or .csv format. This dialog is similar to the Import Frames dialog but is available in Roadmap Mode only and is disabled in Model Mode. Imported targets can be duplicates.

Import Targets Dialog

...

File - The name of a .txt or .csv file. Each line of the file must contain exactly one target’s information. The file cannot have empty lines. The names of the targets must follow RapidPlan Create naming conventions.

Browse - Browse your file manager to open a .txt or a .csv file, which can be imported. The default file location is your home folder.

...

Include names on each line - Check the box if you want to include the target names on each line of the imported file in your RapidPlan Create project. The names of the imported targets need to follow RapidPlan Create naming conventions.

Name prefix - If imported targets do not include names on each line, a name prefix can be added to each target. The imported target names will start with the prefix, followed by the 0-based line number of each imported frame. For example, if Name Prefix = “newtarget”, then imported targets will be newtarget0, newtarget1, newtarget2, etc.

...

Name prefix - If imported targets do not include names on each line, a name prefix can be added to each target. The imported target names will start with the prefix, followed by the 0-based line number of each imported frame. For example, if Name Prefix = “newtarget”, then imported targets will be newtarget0, newtarget1, newtarget2, etc.

Export Frames

Export frame data to a .txt or .csv file using either comma or space delimiters. Export frame data can be selected in either Model Mode or Roadmap Mode.

Export Frames Dialog

...

File - A .txt or .csv file.

...

Include units - Check to include engineering units for each frame’s coordinates values.

Export Targets

Export target data to a .txt or .csv file using either comma or space delimiters. Export target data can be selected in either Model Mode or Roadmap Mode.

Export Targets Dialog

...

File - a .txt or .csv file.

...

Exclude invalid targets - Check to exclude any targets that are invalid, i.e. targets that are resulting in collision or targets with invalid IK solutions or targets that have not been validated.

Export Target Sequence

Export target sequence information, including joint configurations at each via location, connection types, etc. to a .txt file using comma, space, or tab delimiters.

Export Target Sequence Dialog

...

File - a .txt file.

Browse - The export file location, which defaults to the home folder of the current user.

...

Include driver indices - Check to include driver indices, e.g., J0, J1, etc., for each target's joint configurations values.

...

Project Settings

...

Units - Set the length, angle, and area measurement units for your model; set how many decimal places to display for the desired level of precision. The default values are mm, °, mm2.

...

Robot/Object Edges Visibility: Show or hide Robot/Object Edges.

Close Application

Close Application - Exit the application with the option to save or not save a project.

Edit Menu

Undo

Undo (Ctrl+Z) undoes your last action. Note that Undo is available for most – but not all – actions.

Redo

Redo (Ctrl+Shift+Z) – Redo an action that has been undone.

Cut

Cut (Ctrl+X) – Cut the selected item(s).

Copy

Copy (Ctrl+C) - Copy the selected item(s).

Paste

Paste (Ctrl+V) - Paste an item or items that have been copied or cut.

General Rules for Cut/Copy/Paste

• Any robot and/or object can be copied but the pasted result will be weak-mated.

• Robots can be copied as a whole object only. However, selecting only links or a robot TCP is enough to trigger the copy of the whole robot.

• When a robot is being copied, all robot presets that are created for the robot will be copied, with each preset information copied as much is possible, i.e., the robot TCP’s and assigned states will be copied.

• Unlike robots, part(s) of an object can be copied.

• Anything that is attached or assigned to copied objects, for example, targets or frames, will also be copied.

• Frames and targets cannot be copied without the parent item.

• If copied items have a direct connection between each other, for example, joints or mates, they will be copied as well.

• In case of mates, all mate states, i.e., object states, will be copied as well.

• No roadmap data is copied at any time, e.g., target assignments, roadmap connections, and auto-connects cannot be copied.

• Disable collision checking for objects persist in the copied object.

Camera

• Perspective - Option for viewing the workcell in which the objects in the 3D View are presented in two dimensions while still displaying the effect of distance.

• Orthographic - Option for viewing the workcell in which the parallel lines of the shape of objects in 3D View are depicted as orthogonal (at right angles) to the projection plane.

About

About RapidPlan Create

Displays the version number and build ID for the current RapidPlan Create software.

...

License Info

Displays information about the license and allows user to install a new license.

...

Mode Selector

...

Choose here between Model Mode and Roadmap Mode. A new project always begins in Model Mode.

Rules of Mode Transitioning

• RapidPlan Create will display feedback messages when you transition from one mode to the other.

• The Undo history and copy and paste cache will be preserved.

When Moving from Model Mode to Roadmap Mode

RapidPlan Create will retain or remove target assignments, based on changes made in Model mode regarding:

...

• Free joints have been assigned without a robot.

• There are joints with duplicate driver indexes.

• There are objects/robots that are not mated to the world.

When Moving from Roadmap Mode to Model Mode

There is no restriction moving from Roadmap Mode to Model Mode. However, all validation states will be reset and auto-connects are invalidated during the transition. Once back to Roadmap mode, all roadmaps must be re-validated and this change may result in different generated paths based on the previous changes.

To ensure motion paths are maintained the same during transition, convert auto-connects to targets and direct connections.

Tool Bar

Quick-access pushbuttons are arranged from left to right, based on the sequence of the workflow in Model Mode or in Roadmap Mode of RapidPlan Create.

Toolbar in Model Mode

Image RemovedImage Added

Much of the creation, modifying, and measuring of the workcell starts here. The Tool Bar contains buttons for adding robots and robot presets, objects and object states, setting robot dynamics, creating mates, joints, frames, a tool for taking measurements of the model, and tool for disabling collision checks for static objects.

Toolbar in Roadmap Mode

...

Much of the robots' target management and robots' motion planning starts here. The Tool Bar contains target creation, target sequencing, and target assignment functions; and inspection and validation of the collision-free robot motion planning. You can also modify collision checking for parts of the project export the final workcell model project from here.

3D View

The interactive view of the workcell where you can see and modify the model in Model mode or build a roadmap in Roadmap mode. Also known as the canvas.

Cursor coordinates

...

The values in the lower left corner of the 3D View give the current location of the cursor in 3D space.

Frame Rate

The frame rate, aka frame per second that is a metric to indicate amount of images a display can render per second. It is located on the bottom right corner

...

...

Collision View

Turning off collision view will disable the animation of collision rendering (red in color). For more information, see Model Mode | Collision View

...

The Property Tree

...

The components of the workcell model (robots, objects, mates, targets, etc.) are listed here. You can select items, display more details, and delete or edit items.

...

The property tree view can be filtered based on texts in the search box.

Image RemovedImage Added

Expand/Reduce

Press “>” on the left of an object from the property tree to expand.

Press “V” on the left of an object from the property tree to reduce.

Visibility

You can change the level of visibility for items in the 3D View.

...

Context Menus

Context menus are displayed when you right-click on an item in the property tree. These submenus differ depending on what has been selected. Specific options are illustrated below, for each type of item in the property tree.)

Workcell

The workcell is made up of the origin and the floor. The origin is the root of the workcell; everything needs to be attached to, or defined by, the transforms of this point in space.

General Context Items

Undo - Undoes the last action. (Available for most but not all actions.)

...

Edit <name> - Displays the Edit dialog for the named object.

Origin

Visibility (eye) Icon Behavior on Origin:

• Visible =Visibility(eye) icon displayed on hover

• Hidden =Visibility(eye) icon displayed fulltime

Context Menu

...

Floor

Visibility (eye) Icon Behavior on Floor:

• Visible =Visibility (eye) icon displayed on hover

• Hidden =Visibility (eye) icon displayed fulltime

Context Menu

...

Edit Floor

Displays the Edit Floor dialog.

...

You can adjust the size of the floor and its grid using Step Count and Step Size, in X and Y directions.

Robots

The names of robots that are not yet mated are displayed in the Property Tree in blue text. When mated, the names display in black text.

Links

Links are the parts of the robot arm connected by joints. Joints allow the links to move.

Base

The robot base is the local origin frame of an object/link that has the first robot joint as a parent. The base of a robot can be moveable or non-moveable, depending on the robot’s kinematic chain. A linear rail is an example of a moveable robot base.

Default_TCP

The default Tool Center Point for the robot, provided by the robot’s manufacturer. The TCP is a special frame often positioned at the robot's end-effector, which is usually the tip of a gripper or welding tool.

• Robot TCP may be reset to default TCP after changing a frame parent that has tcp as descendant

• Robot TCP may be reset to default TCP after changing a mate parent that has tcp as descendant

Context Menu

...

Active Preset - Choose from among the robot presets in the submenu which is the active preset.

Objects

An object is any 3D model in the workcell that represents an obstacle that robots need to avoid (walls, boxes, etc). Objects can be simple primitives like cubes, cylinders, or spheres, or CAD models (stl, step, stp, dae files). End of arm tooling, for example, a gripper or weld gun, is also an object.

The names of objects that are not yet mated are displayed in the Property Tree in blue text. When mated, the names display in black text.

Subassemblies

A subassembly is a CAD model made up of multiple components. These components are displayed individually within the Property Tree and can be treated as individual parts that can be moved, hidden, deleted, etc. In the example below, the object workcell is made up of the parts latch, base plate, BRACKET, etc.

Context Menu

Object with subassemblies only

...

Object with subassemblies and object states

...

Set Color of Object <name> - Display the Select Color dialog where you can change the display color of the selected object.

...

Active State - Choose from among the mate states in the submenu which is active.

Mates

A mate is a way to constrain geometry, “gluing” one thing to another with a fixed transform. Mates are used to attach robots and objects to frames. A mate has a parent frame, a child frame, and an offset (position and rotation). When mated, the object is no longer moveable (except for prismatic and resolute joints).

Parent/Child

Parenting is a way to link items in a hierarchy. The child item is subordinate to and is defined by and/or offset from the parent item, using frames. In the example below Floor (1,0), a frame on the floor’s grid, is the parent to the child Robot1 (Robot’s base). This is accomplished by mating one of the Robot base to the frame on the Floor.

...

Context Menu

Mates with fixed Parent and Child (fixed states)

...

Mates with multiple states

...

Active State - Choose from among the mate states in the submenu which is active.

Joint

A joint is similar to a mate (geometry that is constrained with a fixed transform), but with one degree of freedom. Revolute joints allow a link to rotate. Prismatic joints allow a link to slide linearly along a single axis, for example, a rail. Joints can be native (if they are built-in in the original robots) or user-defined (if they were added by users).

...

Context Menu

...

Double clicking a joint in the property tree will open the Joint dialog.

Frames

A coordinate system used as a way to orient the world in which you are working. It is a 3D point in space with X, Y, Z coordinates as well as Rx, Ry, Rz rotation information. Its purpose is to make other 3D objects relate to it by using its coordinate system. In Model Mode, you can, among other things, mate items to a frame, measure distances between frames, and convert a frame into a tool center point (TCP).

...

Context Menu

...

Double clicking a frame will open the frame dialog.

Targets

An X,Y,Z, Rx, Ry, Rz node in a roadmap. A target is a desired position and orientation that a robot end-effector should be able to move to. Like a frame, a target is specified by users as a position in Cartesian coordinates and a rotation, relative to a parent frame.

...

Context Menu

...

Double clicking a target from the property tree will open the target dialog.

Filtering Sets of Targets in Roadmap Mode

You can filter which sets of targets are displayed on the canvas in Roadmap Mode. Right-click on the robot on the canvas or in the Property Tree:

...

You can then select which sets of targets (assigned, unassigned, etc.) to display or hide.

Target Sequences

A target sequence is a series of targets you design so that the robot will follow them in order.

...

Context Menu

...

Double clicking a target sequence will open the target dialog.

Create Auto-Connect - Create auto-connects between adjacent pairs of targets in the sequence. This option will trigger the Create Auto-Connect for Target Sequence dialog box.

Auto-Connects

A method to automatically find collision-free paths between a number of targets. An Auto-connect takes a number of targets as input and returns a set of new via points and edges that are needed to move from any input target to any other input target without collisions. The connections created between the two targets will be the shortest paths possible. Auto-connects are non-deterministic, so whenever they are validated, their paths may change.

...

Auto-connects status

Validated:

...

Not validated:

...

Validated with error. (Double click to re-open the auto-connect dialog to edit and check error messages):

...

Context Menu

...

Convert to Manual Connections - Convert a valid auto-connect, including waypoints, to a series of targets and manual connections. After conversion, the auto-connect will be automatically deleted.

Double clicking an auto-connect will open the dialog.

Collision

Collision Rules

Provides ability to disable collision checking for a robot/preset roadmap or part of that roadmap. Collision rules allows to govern roadmap for a robot/preset as this rule is taken into consideration during path planning.

...

NOTE: Validation needs to be done after creation or edition of any such rule to view the change the change in roadmap.

Context Menu

...

The context menu can be triggered by right-clicking any rule under the “Collision Rules” in the property tree.

Globally Disable Object

Provides a list of objects that have collision checking disabled. Objects can be added or removed from the list.

NOTE: Validation needs to be done after any change in this list for the computed path to take the same into account.

...

Context Menu

...

The context menu can be triggered from any object under the “Globally Disable Object” tree. Enabling or disabling collision checking is also possible from the Object context menu.

Collision Analysis

Generated list of pairs of links/objects in the project that (a) will never collide, (b) are always equidistant, or (c) almost always collide. All these detected pairs can be selected, or a subset of them, to disable collision checking for path planning.

...

Context Menu

...

The context menu can be triggered from any pairs under the “Collision Analysis” tree.

Clearance Rules

Provides ability to set clearance rule for a robot/preset roadmap or part of that roadmap.

...

For more information, please refer to to the Roadmap Mode section.

Context Menu

...

The context menu can be triggered by right-clicking any rule under the “Clearance Rules” in the property tree.

Status Bar

RapidPlan Create displays feedback messages and progress information here.

Controlling the Layout/3D View

Pan the view – Press and hold the scroll wheel and drag the mouse.

...

Zoom in and out – Spin the scroll wheel up and down. 

Screen Control Widgets

Resize panels horizontally – Hover your cursor over the vertical line separating the 3D View from the Property Tree. When your cursor becomes a two-headed arrow, you can click and drag to resize the 3D View relative to the Property Tree.

Orientation Cube

...

Snap to the Top, Bottom, Back, Front, Right or Left views automatically by clicking on the desired view on the widget in the upper right corner of the 3D view.

...

Click on the edges of the cube to reverse the view.

Moving the Robot

Access the Robot Jog dialog as linked here and described below. The robot’s jog widgets are displayed on the canvas along with the Jog dialog.

Robot Control Widgets

The robot control widgets are used to move the robot quickly and easily.

White ball at the Tool Center Point

...

Click and hold on the white ball located at the TCP and drag it to move the robot. This is generally the fastest way to move the robot’s TCP to the desired location.

Jog ball will snap to visible targets or frames only by default.

X, Y, and Z Translation Arrows and Squares, and Rotation Curves

Click and hold on the X, Y, or Z axis arrows and drag. The robot will translate along the selected axis. It will move in discrete distance units as defined in the Jog dialog’s Translation Step field.

...

Change the roll, pitch or yaw of the TCP by selecting an X, Y, or Z axis arc and dragging your mouse. The position stays the same, but the rotation changes by increments of the value in the Jog Robot  dialog’s  Rotation Step field.

Robot Jog Dialog

To access the Jog dialog:

• Double-click the robot in the 3D View or the name of the robot in the property tree.

• Right-click on the name of the robot and select Jog Robot from the submenu.

• Right-click on the robot in the 3D View or its name in the property tree and select Jog Robot from the context menu.

• Click Jog icon on the toolbar

If there are multiple robots in the workcell, each robot will have its own tab in the dialog. The currently selected robot is displayed.

Note: Whether you are in Model Mode or Roadmap Mode, the Jog dialogs are nearly the same. The difference is that in the Model Mode Jog dialog, you can add a frame from the current TCP; in Roadmap Mode, you can add a target from the current TCP. Another difference is that collision checking is only available in Roadmap Mode.

...

Live Robot Connection

Live Robot Connection is an experimental feature and only tested with limited number of robot brands. This feature connects to the robot controller directly and read robot joint state in Model mode or Roadmap mode. Please consult with RTR engineers regarding supported robot brands and connection parameters.

...

Joint Jog – Displays the current joint angles. Use the sliders to rotate the robot’s joints.

Tool Jog

Base - The frame/target created can be relative to the Origin or to the robot base.

...

Number Solutions – RPC automatically generates and continuously updates Inverse Kinematic solutions for achieving the TCP location and rotation using different, possible joint angles. You can click on the arrows to step through the solutions. The robot in the 3D View moves to each possible solution and the Jog Robot dialog displays its associated joint angles.

Keyboard Shortcuts