Page Comparison

...

Once the network configuration has been completed, RTR suggests using the Realtime Controller to ping the robot, to make sure that the two devices can communicate successfully. 

...

Digital Input / Digital Output Settings

Realtime Controllers also communicate with Kawasaki Controllers using the DI/DO signals. We must therefore also set that up.
To do so, follow these steps :

1. Press “R” on the Teach Pendant till you go to the home screen

2. Press “R” again and a pop up for a code will appear

3. Enter “611” for the code

4. “Number of I/O Signals” Page will pop up.

5. Fill it up like shown below
   

   Image Added

6. Save / Restart the robot if prompted.
   

Realtime Controller Configuration

...